特點介紹：

1、射臺采用標準雙缸模式，避免單缸機注射活塞每模重復缸內高速旋轉，既高效穩定，又便于維修保養。

     The shooting platform adopts the standard double-cylinder mode,so as to avoid the repeated high-speed rotation

     of the injectionpiston of the single-cylinder machine in the cylinder,which is efficient,stable and convenient for maintenance.

2、開合模標配高響應比例閥和高速機電腦，開合模干循環周期控制在2S左右，開模位置重復精度偏差小于1mm。

     High-response proportional valve and high-speed computer are standard for mold opening and closing. The dry cycle period
 of mold opening and closing is controlled at about 2S, and the repeatability error of mold opening position is less than 1mm.

3、射出重復精度偏差小于1mm，儲料轉速控制可達1rpm，背壓壓力控制小于1bar。

     The injection accuracy deviation is less than 1mm,the storage speed can be controlled at 1rpm, and the back pressure

     iscontrolled at less than 1bar.

4、機器動力均采用雙電機雙泵配置，可選配開儲同步動作使用，有效縮短成型周期。

     The machine power adopts the configuration of double motors and double pumps, which can be used by

     opening and storingsynchronously.effectively shortening the molding cycle.